Product Description
These are designed to be replacements for the listed blower model number. The blowers are aftermarket models-not original equipment. Be sure to compare the dimensions listed, to your unit, to be sure it will fit. The blowers are "contractor kits" with limited instructions. Intended to be installed by a qualified technician. One Year Warranty.
Product Details
- Amazon Sales Rank: #12738 in Kitchen & Housewares
- Brand: Fireplace Blower
- Model: P168DBB
- Dimensions: 15.00" h x 6.00" w x 5.00" l, 6.00 pounds
Features
- Rotom Replacement # R7-RB168B, Blower only
- 115 CFM, 2400 RPM, .92 amps; Skelton Motor, 115 Volts
- cord with 2-prong plug; Mounting Bracket with magnets
- overall length = 13.0" x 4 7/8" height
- 2 openings: 1" x 4 7/8"
Most helpful customer reviews
9 of 9 people found the following review helpful.
Works well.
By Michael F
I purchased this blower to add it to a mid 90's Heat-n-Glo gas fireplace that never had a blower installed. The blower came very quickly from the seller and I installed it in 5 minutes. It is a little tricky to manuever the blower to where it needs to go, but not a fault of this blower.
The blower is quiet and works well. It does push some air and helps to distribute heat.
7 of 8 people found the following review helpful.
Blower motor replacement
By G. Bricker
This blower was purchased to replace a 20-year old identical Regency Wood Stove blower motor. It is exactly the same motor and blower. However, you will need to retain some of the old motor wiring to cut & crimp. The new motor comes with just a crimped power cord and an attached ground wire. You will need to cannibalize the old wiring in order to use your existing power switch and thermal overload. A minor nuisance.
The new blower might also have to be rotated 90 degrees on the baseplate. In order to gain access to the bolts, you have to pinch and remove the cotter pin and then pull (hard) on the plastic blades to remove. Another minor nuisance. Make sure you have a magnetized socket screwdriver handy.
Altogether, it took my fat fingers about 30 minutes to install. The new blower is whisper quiet.
2 of 2 people found the following review helpful.
Lower Gas Bill
By Ruben Blackmon
The hardest thing about these blowers was making sure I had the correct one for the fireplaces I have. I received it and had very little trouble installing it. Again, the manufacturer make the most problems. It works better than I could have imagined, to include all three blower settings. It was so good that I ordered another one because I have two fireplaces. Recommend that installation instructions from the manufacturer is downloaded before you order because the blower comes only with instructions on how to mount it and plug it in.
Tidak ada komentar:
Posting Komentar