Product Description
Induction cooking is a safe method of cooking because there is no open flame or hot cooking element. Additionally, our Induction Cooktop has more heat settings than others on the market, offering greater flexibility in cooking.
Product Details
- Amazon Sales Rank: #6173 in Kitchen & Housewares
- Color: White
- Brand: Max Burton
- Model: 6000
- Released on: 2008-06-05
- Dimensions: 2.50" h x 12.63" w x 14.00" l, 7.85 pounds
Features
- 1800-watt portable single-burner induction cooktop heats instantly
- 10 Power levels; adjustable heat levels range from 140 to 450 degrees F
- Cookware detection and overheat sensors prevent scorching and injury
- 180-minute timer; push-button control panel with LED display
- Measures approximately 14 by 12-3/5 by 2-1/2 inches
Most helpful customer reviews
739 of 745 people found the following review helpful.
Induction Cooking 101
By Music Lovers
As an experienced cook with many years of cooking with Induction under my belt, I would like to share my experience, and clear up a lot of bad information propagated by some well meaning, but totally unqualified people who have submitted comments about the Max Burton 6000 Induction Cooker. I am also an Electronics & Mechanical Engineer, giving me additional insight into some of the issues being discussed.
First off, this Induction Cooker is a tremendous bargain, comparing favorably with products many times its cost. It is truly an 1800 Watt (input) Induction Cooker. Induction Cookers cannot be compared in any way to simple hotplates that use a resistive heating element. Electric hotplates, similar to conventional gas and electric burners are at best around 50% efficient. The wasted heat simply goes into heating your kitchen and makes your stove and cookware handles scorching hot. Induction Cooking is typically 80-90% efficient. Remember that even though the Max Burton 6000 is a great value, it is still a light duty, "entry level" Induction Cooker (NOT for continuous commercial cooking use). If it is used properly, it should give years of reliable service. Even though I own a big Wolf commercial gas range, Induction hobs such as this have become my cooking "weapon of choice".
You can consider the following to be "Induction Cooking 101". This will help cooks who are new to Induction Cooking get a quick grip on the basics:
Cookware: Your satisfaction with Induction Cooking is directly proportional to the quality of your cookware. The cookware MUST have the following two characteristics:
First: At least the bottom must be ferrous (in other words, a magnet must strongly "stick" to it). Hint: Take a magnet with you when searching for cookware.
Second: Your cookware must also be a good heat conductor of heat. Induction cooking only generates heat in a 5-7" circle in the bottom of your pan. The heat conduction characteristics of the pan allow the heat to travel outward and up the sides of the pan. If the pan is a poor heat conductor, you will have a small hot spot in the center of the pan, and the rest will be relatively cool. The best cookware is triple-clad (magnetic stainless steel outside, aluminum or copper center layer, non-magnetic stainless interior cooking surface). Vollrath "Tribute" cookware is my favorite (not inexpensive, but really performs great!!). Next best is a laminated pad or "cap" on the bottom of a stainless pan (similar to the totally triple-clad, but doesn't conduct much heat far up the sides of the pan). Cast Iron and Enameled Cast Iron works fairly well for slow cooking and braising, but in spite of popular belief, it is not a great conductor of heat, and can exhibit hot spots if used at high heat settings. AGAIN, Induction Cooking has no radiant energy, nor a gas flame to heat the sides of your cookware. Your cookware MUST be a good heat conductor!
Yes you can preheat an empty pan (if you follow my directions)!. First a little information about the way your Induction Cooker senses the temperature of your pan. The heat sensor is located under the glass/ceramic cooking surface. Because of the thickness of this surface, it takes a finite amount of time for heat from the bottom of the pan to "soak" downward through the cooking surface in order to reach the temperature sensor. If you select a high heat or temperature setting initially, the pan will quickly get screaming hot before the heat sensor "knows" about it (a phenomenon called "overshoot"). The remedy is to start your pan in the "temp" mode at a low temp. setting (like 180°F). Once the pan, cooking surface and temp sensor has stabilized (you will hear a clicking sound as the cooker cycles the power on and off), you can advance to higher settings in a similar way and get on with your cooking.
I have read the comments about some users developing cracks in the top surface of the plastic housing to the left of the display & keypad. This is almost certainly caused by using cookware that laps over the edges of the cooking surface, or using very high heat settings, The flat part of the bottom of your cookware should not exceed 10 1/2" inches.
Unless you are bringing a pot of water to a boil, resist the temptation to cook at the higher heat and temperature settings unless it is really necessary. Remember that Induction Cooking pumps an astonishingly great amount of thermal energy into the BOTTOM of your cookware. Make sure that you and your cookware are up to the task!
The only big gripes that I have with the Max Burton 6000 is the INTOLERABLY LOUD BEEPER and the incredibly stiff, cheap power cord ("MAX", ARE YOU READING THIS??!!). As a qualified engineer, I have already "reasoned" with the beeper. . .
Happy Cooking! Bob Ziller
365 of 373 people found the following review helpful.
A mixed review
By Brian Leeland
There's good news and bad news. I bought this unit as a training unit to check out the technology and have a good extra hob on hand for times when we strain our kitchen resources. The intent is to eventually equip our kitchen with an induction cooktop for energy efficiency.
The good news is that the technology works as advertised. It's remarkably quick and has plenty of power despite running off a normal power outlet. The bad news is that on this unit the heating element (if that is the correct terminology) is only about 7 to 8 inches across. It worked fine when we made soups, though we did notice that only the middle boiled or simmered. However, when frying, the limitation of the element size became a problem. We used a lodge 12" cast iron skillet to fry fish. The center of the pan put a beautiful tan on the panko, but the outside of the pan was relatively cool, requiring that each piece of fish be flipped to four positions before it was properly cooked.
We tested the unit by wetting the bottom of a cold pan and watching how it dried. The center bubbled and dried, but the outer bottom was only warm to the touch. I thought perhaps it was defective, but other reviewers have commented on the problem.
I notice that most of the units on the market do not specify the size of the heating element. Whether this exposes a problem with the technology or is just marketing avoiding a problem with inexpensive units I can't tell.
I am hopeful of the technology, but returned this unit because of it's limitations. If you only use smaller pans, or rarely, if ever, fry, I recommend it.
As has been mentioned before the first unit arrived broken.
77 of 79 people found the following review helpful.
Differences between model 6000 and 6200:
By D. Chambers
The other reviews cover everything else nicely, except:
1. The difference between the model 6200 and the 6000 is that the 6200 has a stainless steel skin, while the 6000 is black plastic. The innards and wattage are identical.
2. If you purchase this with 1-click ordering, you'll miss out on free shipping. Grrrrr. To avoid spending an extra $9.00 on postage, use the checkout cart instead.
3. If you want an excellent overview of induction cookers, look up the topic in wiki-pedia.
4. (Updated 8-2011). Someone in the comments below asked what the wattages are: When the "Power" mode is selected, Level 1: 200w. 2-500. 3-800. 4-1000. 5-1200. 6-1300. 7-1400. 8-1500. 9-1600. 10-1800w. When the "Temperature" mode is selected, the ranges (1-10) are (in degrees F): 140, 180, 210, 250, 280, 320, 360, 390, 430, 450.
5. (Updated 11-2012). I had not used the "Temperature" mode at all. A friend came over for Thanksgiving with his bacon/watercress soup (thick) and needed to re-heat it. After messing around with the "Power" and "Time" settings, he finally chose "Temperature" at 140. There was much less stirring, and no fussy regulation of a flame (all to avoid burning the soup on the bottom of the pan). He was mightily impressed, and since he is an excellent cook, I was mightily impressed too. Reminder: his excellent soup pot was aluminum, and so it would not heat at all (Error "E2" in the display, after two seconds). We loaned him a nice cast iron Le Creuset pot and all progressed smoothly. Remember that any pot that attracts a magnet will work (thus aluminum and most stainless steel won't work). Furthermore: the traditional cooks swarming and crowding the kitchen stove on Thanksgiving were just as glad to have him and the induction unit out on the patio, and out of the way.
Please click the "helpful" button if any of this was useful. Thanks.
Tidak ada komentar:
Posting Komentar